2K MAXCARE FADE OUT THINNER MC-1401

Fade-out thinner developed to allow a smooth and invisible spot repair with Otto Refinish 2K topcoats or 2K clearcoats. MC-1401 used in any case? When patching paint, repairing car. The layer of Old & new paints have different thicknesses. The painter does not seek the way to gradually lower eyelid paint, will be easily detected asynchrony between old & new paints. 2K Otto Fade Out Thinner MC-1401 will be used in this case. 2K Otto Fade Out Thinner MC-1401 is stronger than normal other. So, it can easy phase soluble spray paint remnants.

Code: MC-1401/5L

Đơn vị tính: Lon - Nhập khẩu 100% từ Malaysia. / Unit: Can - 100% Imported from Malaysia.

Giá: 378,000 vnđ

Ms. Diệu 028 37201081/ 028 37202501

►HƯỚNG DẪN ĐẶT HÀNG / ORDER GUIDE

Ngoài giờ hành chính xin vui lòng đặt hàng online trên website. / Office hours please order online on the website.

*** Giá bán đã bao gồm %VAT. / Inc.VAT.

**** KHÁCH NGOÀI PHẠM VI TP.HCM XIN VUI LÒNG THANH TOÁN TRƯỚC

*****Phí giao hàng, vui lòng xem tại:/ Delivery charges, please see:

https://hunggiapaints.com/phuong-thuc-van-chuyen/

Product detail

FADE OUT THINNER MC-1401

PRODUCT DESCRIPTION

Fade-out thinner MC-1401 developed to allow a smooth and invisible spot repair with Maxcare 2K topcoats or 2K clearcoats.

RECOMMENDATION FOR USE

Volume Mixing Ratio :           According stable rates

Pot life at 20° C :           No application

Safety     :           Consult Safety Data Sheet prior to use

REPAIR SYSTEMS

Overall repair:

Pay attention to the application method. Spray procedure has to ensure proper overspray melt-in which is achieved within 2 min of the clear application. Plan the process to avoid dry overspray.

Spot repair: Fade-out Thinner method

① Apply 1 coat of Clear coat over the basecoat, extending into the area

surrounding the spot.

② Apply a 2nd coat of Clearcoat, extending further into the area surrounding the

spot.

③ OPTIONAL: reduce 1 part of Clearcoat with 1 part Fade out thinner and

apply 1 coat of reduced Clearcoat over the fade-out area.

④ Smoothen out the fade-out area immediately with pure Fade out thinner MC-1401 !

Surface should be carefully and correctly prepared before the basecoat application.

See recommended use, paragraph surface preparation. ! Stay with the application of Fade out thinner within the prepared area. If necessary, balance out the gloss level by polishing with a non silicone containing polishing compound or a non silicone containing final glaze, after complete hardening of the repair.

OTHER INFORMATION

The information is accurate to our best knowledge and is given in good faith but without warranty. It remains the user’s own responsibility to make sure that the information is appropriate and complete for his special use of this product.

Hung Gia Paint Co., Ltd

779 Kha Van CAn Street, Linh Tay Ward, Thu Duc District, HCM City.

Tel: +848 37202501 Fax:    +848 37202450