Binder for Solid Basecoat OTTO-140

OTTO-140 Binder for Solid basecoat uses specialized for Solid color, does not contain silver or Camay. When mixing with the tinter, the finish dries quickly in 15 minutes, and can paint the next layer. The Basecoat tinter is solvent based coatings and is especially good for automotive refinish. It features high consistency for color matching. This fast air drying basecoat quality covers at low film thickness (10-20 μ), applies smoothly with perfect aluminum flake control in metallic’s. Can be used for spot, panel and overall repair. -Suited for multi-tone striping and design work.

Code: OTTO-140/18L
Đơn vị tính: Thùng 18L - Nhập khẩu 100% từ Malaysia. / Unit: Can - 100% Imported from Malaysia.
  • Giá: 3,334,000 vnđ

Ms. Thảo  028 37201081/ 028 37202501     
 

HƯỚNG DẪN ĐẶT HÀNG / ORDER GUIDE 

Ngoài giờ hành chính xin vui lòng đặt hàng online trên website. / Office hours please order online on the website.

*** Giá bán đã bao gồm %VAT. / Inc.VAT.

**** KHÁCH NGOÀI PHẠM VI TP.HCM XIN VUI LÒNG THANH TOÁN TRƯỚC

*****Phí giao hàng, vui lòng xem tại:/ Delivery charges, please see: 

https://hunggiapaints.com/phuong-thuc-van-chuyen/

 

  • Product detail
  • Our company has gained confidence in providing Acrylic Binder for our customers over 10 years. Acrylic Binder is produced from chemical compounds in order to synchronize with standard 2K paint system. Beside of the quality of product has been controlled on the determined parameters before delivery.
     
    OTTO - 140 –  Binder for Solid basecoat

    Using in formula Solid basecoat

    • Dry and makes better efficiency for the layer;
    • Create opacity;
    • It doesn't contain adjustable components silver. That makes it is different OTTO-150, OTTO-160.                                             

    These products are only used for car paint. Consult Safety Data Sheet prior to use.

    BINDER FOR SOLID BASECOAT


     

    INTRODUCING:

     

     

     

     

     

     

     PRODUCT:  

    • This is 2K paints refinish for Solid Color (excluding Metallic, Pearl, Xirallic) fast drying, with characteristic perfect cover.
    • 2K mixing color system can mix all the color of vehicle zin from a base color ranges accurately
    • 2K can be used for all forms of painting cars and full-color formula from manufacturers leading car.
    • 2K Auto Refinish will achieve cover with fewer costs than other same level paints. So, it is very significant for saving on time and costs.
    • Safety Data Sheet has to refer to TDS 2K Clear.

     

    The main ingredient is Acrylic denaturation.

    SUITABLE SURFACE:         

    • The good paint is painted the primer and filled surface. 
      Recommended using  2K Otto Refinish Primers.

    VOLUME MIXING RATIO:         

    • Solid basecoat :           Thinner 2K

                       1 part            :           0.8 – 1 part

    SPRAYING VISCOSITY:                    

    • DIN cup BSB4 at 16 – 18 seconds.

    SPRAYING EQUIPMENT:

    • Gun Nozzle 1.3 – 1.5 mm Spray Pressure 40 – 45 psi (3.8 – 3.2 bars)

    SPRAYING TECHNIQUE:             

    • Spray 1 single coat and then spray 1 couple coats.    
    • Flash off 3 to 5 minutes between coats.
    • Before apply 2K Clear, leaving 10 – 20 minutes until all the films  dry.

    Remark: Remove all traces of sanding dust out the surrounding areas,                Wipe dry with a clean cloth before applying 2K Clear.

    COVERAGE:        

    • About 6-8m2/ 1L             

    PERSONAL PROTECTION:

     

    • Eye And Skin Protection        :  Safety glasses, uniform, apron, glove (neoprene or nitril rubber are recommended)
    • Respiratory Protection            :  Not required if adequate ventilation exist. If the airborne concerrntration exceeds exposure limit, use adequate respiratory protection such as approved artridge respirator for organic vapour. ( gas only)
    • Consult Safety Data Sheet OTTO Refinish prior to use.

     

    INHALATION:                     

    • Remove the victim to fresh air area. If rapid recovery does not occur, perform artificial respiration and obtain medical attention.

     

    INGESTION:                       

    • If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.

     

    SKIN CONTACT:

    • Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.

     

    EYE CONTACT:

    • Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.

     

    OTHER INFORMATION

     

     

     

     

    • The information is accurate to our best knowledge and is given in good faith but without warranty. It remains the user’s own responsibility to make sure that the information is appropriate and complete for his special use of this product.

     

    hunggiapaints.com

      779 Kha Van Can Street, Linh Tay Ward, Thu Duc District, HCM City.                           Tel: +848 37202501 Fax:+848-37202450

     

     

     
  • comment(s) (0)
  • Bình luận facebook




    Captcha